Oilybits
Chemiphase for biodiesel additives TT700A promotional video.

Not logged in [Login - Register]

Go To Bottom

Search
[Next Page]
Are you a prosessor tart
Sounds like alot of twaddle going on this thread!
8-9-2010 at 03:32 PM
by: hhhold
Multi tube Heat exchanger questions
Hello Mike,
great job with the copper,
i have a similar setup on my processor without the multi-co ...
29-8-2010 at 09:47 PM
by: hhhold
Run on Biodiesel

And that film thing on the spinning disc????...its just as Jim says...twaddle to confuse the less ...
14-8-2010 at 03:37 PM
by: hhhold
Run on Biodiesel
What's this spinning disc you're talking about hhhold?

Nige
this is cut & paste from a del ...
14-8-2010 at 11:42 AM
by: hhhold
Run on Biodiesel
NigelB has made some good points on reasons why not to put bio-diesel in a TDCI engine ,
i have rea ...
13-8-2010 at 07:55 PM
by: hhhold
Run on Biodiesel
I'm running my 2004 tdci focus on 50% bio summer 30% bio winter ,

you wouldn't know its on bio a ...
13-8-2010 at 01:48 PM
by: hhhold
Volvo XC90 D5 intermittant missfire/stalling
You could check on ebay Mark to see if theres a code reader that might give you some live readings, ...
8-8-2010 at 09:02 PM
by: hhhold
Volvo XC90 D5 intermittant missfire/stalling
You might try a leak off test of your injectors,

i went to wilco & bought the leak off hose f ...
7-8-2010 at 09:10 PM
by: hhhold
Domestic storage of methanol - limits / regulations?
Don't know if you will find something here,

http://www.hse.gov.uk/search/results.htm?q=methanol&a ...
7-8-2010 at 08:49 PM
by: hhhold
Green Intent goes into Voluntary Liquidation...
Not alot of help but i'm sorry to hear that,

you've helped alot of people with your advice & ...
5-8-2010 at 08:52 PM
by: hhhold
Methanol poisoning
So Methanol is a dangerous neurotoxin, if we have been exposed to fumes & have taken Vodka to he ...
23-7-2010 at 08:37 PM
by: hhhold
Avatar
give jim a call,

sure he'll fix it:roll:
23-7-2010 at 08:23 PM
by: hhhold
Methanol fumes .. .. ..
Hope it wasn't one of my dumb ass posts that you read stu,:duh:

these days i'm doing all i can to ...
18-7-2010 at 10:52 PM
by: hhhold
Methanol fumes .. .. ..
Vodka helps, try the russian blue label .
18-7-2010 at 08:59 PM
by: hhhold
Digital readout for K Type Thermocouples
i have the 1.5v digi readout probe, works great for the head temp when de-mething,

when i get tim ...
8-7-2010 at 09:07 PM
by: hhhold
My First build..
One other thing to think about Wappy is if you use alot of heat close to the bottom of a 45gallon st ...
4-7-2010 at 05:43 PM
by: hhhold
My First build..
Hello Wappy,

for welding disimilar metals you can use a silicon bronze mig wire although its exp ...
3-7-2010 at 09:55 PM
by: hhhold
Arrival of the little man!!
congrats btw & i toast your new arrival.
29-6-2010 at 09:10 PM
by: hhhold
Eductor
ok i will read abit more into it HC,

thx for your reply.
29-6-2010 at 08:32 PM
by: hhhold
Acetone Experiment in a PD130
What about putting it in a gallon can with the bio & mixing it & then adding it to the fuel ...
29-6-2010 at 08:30 PM
by: hhhold
Eductor
I was just wondering what people thought of using something like this as an eductor would work,

h ...
29-6-2010 at 08:21 PM
by: hhhold
Condencing methanol
wouldn't that be the water as cool as possible as we are just after changing the methanol from a vap ...
22-6-2010 at 10:57 PM
by: hhhold
Waterwashing - does is still go on....?
I'm just thinking out loud here,

after a WBD, the bio temp will probably be 85-90C ,


why not ...
11-6-2010 at 09:28 PM
by: hhhold
PD DE METH
thx for the tip brtp , i will re read other posts on it again before embarking on it.:cheers:
7-6-2010 at 10:01 PM
by: hhhold
PD DE METH
I like the sound of the chiller or fridge unit,

once things have slowed down to a gallop i will ...
7-6-2010 at 08:43 PM
by: hhhold
[Next Page]

  Go To Top

Powered by XMB
Developed By The XMB Group © 2001-2008

Currency data courtesy coinmill.com

Rules for this forum:
1.No swearing or abusive behavior will be tolerated.
2.No spamming by any means - we WILL spot spam.
3.Advertising is allowed in the classified section only, unless you have paid for a banner at the top of the pages.
4.No dangerous equipment can be advertised and all chemical processors must be vetted beforehand.
5.You are free to voice your opinions on any subject. Most of our posts are only opinions and should not be taken as fact.
6.Non of the opinions or posts on this forum, by moderators, administrators, or otherwise, represent the opinions or policies of Goat Industries.
7.To keep this a friendly place, a sense of humor is appreciated.

Health and safety:
1.Biodiesel production is a potentially dangerous process and should only be undertaken by competent people. It is not suitable for unsupervised children etc.
2.Methanol has explosive vapors and is deadly poisonous. It burns with an invisible flame.
3.Sodium hydroxide/potassium hydroxide/caustic/lye will burn skin. Do not breathe in the dust. Animals will try to eat it as it smells of salt.
4.Concentrated sulphuric acid will burn skin and explode if water is added to it.
5.All these chemicals should be stored properly and kept away from children.
6.Most common serious accident: Processor blows up due to immersion heater being accidently switched on when empty.