| Search |
| [Next Page] |
Will undemethed glyc help clean the drains? the worst job in the world is clearing drains, when I was doing it the culprit was usually the plast ... |
7-9-2010 at 12:00 AM by: JIM.M |
I'm Back. my problem was a new build house and the phone line is underground and there was a blockage in the p ... |
6-9-2010 at 10:54 PM by: JIM.M |
I'm Back. I sympathise with you over losing your Internet connexion, I had the same problem when I moved home ... |
6-9-2010 at 08:48 PM by: JIM.M |
Mercedes Benz C250 Turbo Diesel 1997 I cant see any evidence of marks on the glow plugs, I was out in it today around town and the light ... |
6-9-2010 at 07:25 PM by: JIM.M |
Removing car tyres - anyone got bead breaker/tyre levers? I am always amazed at what people on here have in their sheds , who would have thought someone would ... |
6-9-2010 at 06:08 PM by: JIM.M |
Removing car tyres - anyone got bead breaker/tyre levers? around here you can get a puncture repaired for £5.00 so that would be £20.00 for four tyres taking ... |
6-9-2010 at 12:20 AM by: JIM.M |
Mercedes Benz C250 Turbo Diesel 1997 got it home without any problems, the EPC light came on and I lost some power but then the power cam ... |
5-9-2010 at 04:56 PM by: JIM.M |
What is this - not fuel related whatever it is it was built to last, not like things today, built in obsolescence I think they call ... |
5-9-2010 at 11:24 AM by: JIM.M |
Mercedes Benz C250 Turbo Diesel 1997 Its like joining the masons when you get C250D, glad I joined, thanks for the help I don't think it ... |
4-9-2010 at 08:37 PM by: JIM.M |
Mercedes Benz C250 Turbo Diesel 1997 thanks |
4-9-2010 at 04:52 PM by: JIM.M |
Mercedes Benz C250 Turbo Diesel 1997 I was thinking the new fuel filter could be to blame, can you tell me which one to get as I haven't ... |
4-9-2010 at 04:42 PM by: JIM.M |
Mercedes Benz C250 Turbo Diesel 1997 just won this on the bay item 280555678000 £750.00 what do you think, not seen it, I will try to col ... |
4-9-2010 at 02:54 PM by: JIM.M |
Pressure tester for processor strength tests are done with water or oil, leak testing is done with air, you only need 5psi, if you ... |
4-9-2010 at 12:04 AM by: JIM.M |
ebay heat exchanger, need quick advice the FPHE will heat the oil fastest because of the bigger heating surface |
3-9-2010 at 11:46 PM by: JIM.M |
Car's that work with Veggie oil sorry just done a search found lots of info |
3-9-2010 at 08:20 PM by: JIM.M |
Car's that work with Veggie oil does anyone know about a merk c250 elegance 1996, are they any good on veg and how is the body for r ... |
3-9-2010 at 08:08 PM by: JIM.M |
glow plugs which always nice to hear other peoples recommendations, especially if you can get the real thing cheaper, ... |
3-9-2010 at 11:13 AM by: JIM.M |
ebay heat exchanger, need quick advice don't waste your money go for FPHE from a combi boiler, but get the one with the male threaded conn ... |
2-9-2010 at 10:07 PM by: JIM.M |
glow plugs which on some cars they are such a pig to do it pays to go for the best which I think are Duraterm BUT bew ... |
2-9-2010 at 09:59 PM by: JIM.M |
using exhaust heat you control the temperature by controlling the amount of heat going into the pipe through the bracke ... |
2-9-2010 at 09:43 PM by: JIM.M |
using exhaust heat every year about this time this subject comes up, and every year we come to the same conclusion that ... |
2-9-2010 at 06:38 PM by: JIM.M |
Multi tube Heat exchanger questions and the crimps were to stop a hot core in the 15mm pipes as well as changing the direction of the fl ... |
1-9-2010 at 11:02 AM by: JIM.M |
Multi tube Heat exchanger questions if the area of the small pipes are not matched exactly to the inlet and outlet of the feed pipes som ... |
1-9-2010 at 10:49 AM by: JIM.M |
Multi tube Heat exchanger questions unless you have some restriction on the small pipes going through the HE the venturi will pull the v ... |
31-8-2010 at 09:48 PM by: JIM.M |
Seperation by vibration you have to start small to see if it works, a toothbrush in a pop bottle will tell you if its going ... |
30-8-2010 at 11:40 AM by: JIM.M |
| [Next Page] |