vegetableoildiesel.co.uk - Powered by XMB

Not logged in [Login - Register]

FAQ

Member List

Today's Posts Forum Stats

Stats

Making biodiesel is potentially dangerous. Click HERE for more information.

vegetableoildiesel.co.uk » Search

Search
[Next Page]
Engine stopping when on oil cold [quote][i]Originally posted by Mr Cat[/i] What's wrong with Jubilee clips? I never had a problem ma ...	7-9-2010 at 08:59 AM by: BioTim
Lacerated by an FPHE Sounds like a nasty cut. I try an avoid hospitals, but for stitches I generally get it sorted. Scars ...	7-9-2010 at 08:57 AM by: BioTim
Fuel temp sensor The pocket is just easier than having to seal around the wires. You can seal the sensor inside a sma ...	7-9-2010 at 08:51 AM by: BioTim
Land Rovers & Low Engine Temperature Problems We got 70C out of a 300TDi engine and a FPHE. Having said that you don't need to go above 50C with y ...	7-9-2010 at 08:40 AM by: BioTim
Engine stopping when on oil cold I'd take that heater out for a start. Measure the temperature "rise" for yourself, but I suspect whe ...	7-9-2010 at 12:06 AM by: BioTim
Fuel temp sensor I've measured the fuel temperature directly two ways. First a K-Type probe push into the pipe at a j ...	6-9-2010 at 07:25 PM by: BioTim
Insurance and ASKMID website If they say you're insured then you are. You paid for it starting immediately, then you shouldn't ha ...	6-9-2010 at 07:20 PM by: BioTim
Naughty step candidates?? It#s what happens when you give people a position of power they abuse it. Unless everyone in the cha ...	5-9-2010 at 10:21 AM by: BioTim
What is this - not fuel related Needle sharpener to speed up the knitting process.	5-9-2010 at 10:16 AM by: BioTim
NaOH Vs KOH users - soap settling times - how LONG is YOURS? How long till I'd run it through the eco2pure? how long till less than half the soaps remain, or how ...	26-8-2010 at 11:18 AM by: BioTim
Steel oil tank in outbuilding? The EA has regs on waste oil storage. I think you have to apply and you're allowed up to 10,000L or ...	25-8-2010 at 05:55 PM by: BioTim
WOW I'd have thought you'd be better off putting a new air filter in that fitting that. I've got no prob ...	25-8-2010 at 05:51 PM by: BioTim
Significant power loss on wvo? if you're using 90% WVO in a car without any form of conversion you're likely to get a loss of power ...	25-8-2010 at 10:02 AM by: BioTim
New Company and Concept [quote][i]Originally posted by High Compression II[/i] A few more things to think about.... How ...	24-8-2010 at 12:07 AM by: BioTim
What percentage conversion safe for a 300 tdi? [quote][i]Originally posted by julianf[/i] I should have been more clear - Id be happy to run o ...	23-8-2010 at 09:02 PM by: BioTim
TEMP FORUM CODE FIX!!! [quote][i]Originally posted by paddygoat[/i] BB code is now enabled! :smiley-rpg028: [/quote] Aw ...	23-8-2010 at 07:17 PM by: BioTim
What percentage conversion safe for a 300 tdi? Did thousands of miles on 100% WVO with a single tank with our "heater that is impossible to work"(o ...	23-8-2010 at 02:17 PM by: BioTim
How many active members are there on the forum? I'd say probably 30 of us hardcore that are here 24/7, and maybe nearer 150 that have usefully poste ...	22-8-2010 at 11:47 PM by: BioTim
New Company and Concept Water washing is a simple process, but you'd be surprised how wrong it can go if you make bad fuel. ...	22-8-2010 at 11:42 PM by: BioTim
Processor build considerations: request for assistance If you want it to be used as a biodiesel processor you can forget not spending any money on it so I' ...	22-8-2010 at 11:27 PM by: BioTim
oh no not another newbie It will also get lighter with age as you settle it.	22-8-2010 at 09:20 PM by: BioTim
TEMP FORUM CODE FIX!!! [quote][i]Originally posted by scottydog[/i] The link on bio tims post works ok? SD [/quote] ...	22-8-2010 at 07:07 PM by: BioTim
TEMP FORUM CODE FIX!!! Just tried this on Chrome, worked fine. The chrome equivalent is Greasemetal and I got a pre-made sk ...	22-8-2010 at 06:28 PM by: BioTim
New Company and Concept [quote][i]Originally posted by FriendlyDiesel[/i] I have thought of a possible solution to the pro ...	22-8-2010 at 06:20 PM by: BioTim
What size are tam105 fittings Who would have thought text speak could be confusing?	22-8-2010 at 03:45 PM by: BioTim
[Next Page]

vegetableoildiesel.co.uk » Search


Currency data courtesy coinmill.com

Rules for this forum:
1.No swearing or abusive behavior will be tolerated.
2.No spamming by any means - we WILL spot spam.
3.Advertising is allowed in the classified section only, unless you have paid for a banner at the top of the pages.
4.No dangerous equipment can be advertised and all chemical processors must be vetted beforehand.
5.You are free to voice your opinions on any subject. Most of our posts are only opinions and should not be taken as fact.
6.Non of the opinions or posts on this forum, by moderators, administrators, or otherwise, represent the opinions or policies of Goat Industries.
7.To keep this a friendly place, a sense of humor is appreciated.

Health and safety:
1.Biodiesel production is a potentially dangerous process and should only be undertaken by competent people. It is not suitable for unsupervised children etc.
2.Methanol has explosive vapors and is deadly poisonous. It burns with an invisible flame.
3.Sodium hydroxide/potassium hydroxide/caustic/lye will burn skin. Do not breathe in the dust. Animals will try to eat it as it smells of salt.
4.Concentrated sulphuric acid will burn skin and explode if water is added to it.
5.All these chemicals should be stored properly and kept away from children.
6.Most common serious accident: Processor blows up due to immersion heater being accidently switched on when empty.